Home Page Product listing by category Reference materials, engineering tables, downloads, archives, terms and conditions Product Applications Introduction to application-specific modules A collection of technical tips about our products, troubleshooting and general RDL knowledge Contact Radio Design Labs Employment opportunities Dealer Login Radio Design Labs Banner banner.php




Stay Connected RDL on Facebook RDL on Twitter RDL on YouTube RDL RSS Feed


PRODUCT CATEGORIES > AUDIO > POWER AMPLIFIERS >
EZ Products Banner

EZ-PA20 20 W Stereo Audio Amplifier - 8 Ω, with Power Supply

EZ-PA20 20 W Stereo Audio Amplifier - 8 Ω, with Power Supply image
Click for larger image
Model numbers:
EZ-PA20 includes power supply with North American plug
EZ-PA20X includes worldwide power supply (specify plug)

Features:

  • Audio Amplifier with Front-Panel Level Control
  • 10 Watts RMS Per Channel into 8 Ω
  • 8 Watts RMS Per Channel into 4 Ω
  • Switch-Selectable Load Impedance on Rear Panel
  • Unbalanced Line Input on RCA Jacks
  • Switch-Selectable Mono or Stereo Mode
  • Integral Overload Limiter with LED Indicator
  • Limiter Controls Overloads from Clipping

Advantages:

  • Limiter Produces Output Level Comparable to Higher Power Amps
  • Mono Mode Switch Sums Left and Right Inputs
Click here for larger image of the EZ-PA20 Application Drawing
Click here for information on how to buy this product

The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.


Typical Performance:

Input:
> 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max.
Gain:
Off to 32 dB
Outputs (2):
Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switchΩselectable output impedance
Frequency Response:
35 Hz to 20 kHz (±1.5 dB, 10 Watts)
THD+N:
< 0.25%
Crosstalk:
< -68 dB (1 kHz)
Noise:
< -70 dB (below 10 Watts)
24 Vdc power supply current:
160 mA (idle), 1000 mA (max.)
Case dimensions:
5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size:
1/3 rack width


Related Products:


Mounting Accessories:

EZ-SMB2
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
EZ-RA6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC2
EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

General Accessories:

EZ-SD1
EZ-SD1
Storage Drawer - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-FP1
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
Home
Products
Reference
Applications
Introduction
Tech Tips
Contact us
Employment
Login
Sitemap

Copyright © 2010 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: June 29 2010

...